To access the router user interface, open your Internet Browser and write http://192.168.1.1 on the address bar.
Enter the Username and Password User name : admin
Password : admin
Click on OK button
First Step: Restore to Factory Default Settings
- 1- Press "Management"
- 2- Press "Settings"
- 3- Press "Restore Default"
- 4- Click on "Restore Default Settings"
Second Step: Router Configuration
- 1- From router interface home page , Press "WAN" and Press on "Add"
- 2- Check the below image, and make the settings the same as shown, except for "username" & "password". If you don’t know your username or password, please contact LINKDSL technical support at 16333.
- 3- Press "Apply"
Last Step: Change the Router Administrator Password
- 1- Press "Management"
- 2- Press "Access Control"
- 3- Press "Passwords"
- 4- From Username Drop down menu Choose "admin" Enter Old password , New Password and Confirm New Password
- 5- Press "Save/Apply"
